# preg_match

(PHP 4, PHP 5, PHP 7)

preg_matchRealiza una comparación con una expresión regular

int preg_match ( string $pattern , string $subject [, array &$matches [, int $flags = 0 [, int $offset = 0 ]]] ) Busca en subject una coincidencia con la expresión regular dada en pattern. ### Parámetros pattern El patrón de búsqueda, como cadena. subject La cadena de entrada. matches Si se proporciona matches, entonces éste se llena con los resultados de la búsqueda.$matches[0] contendrá el texto que coincidió con el patrón completo, $matches[1] tendrá el texto que coincidió con el primer sub-patrón entre paréntesis capturado, y así sucesivamente. flags flags puede estar seguido de la siguiente bandera: PREG_OFFSET_CAPTURE Si se pasa esta bandera, por cada coincidencia producida, el índice de la cadena añadida también será devuelto. Observe que esto cambia el valor de matches dentro de una matriz donde cada elemento es una matriz consistente en la cadena coincidente en el índice 0 y su índice dentro de la cadena subject en el índice 1.  <?phppreg_match('/(foo)(bar)(baz)/', 'foobarbaz',$matches, PREG_OFFSET_CAPTURE);print_r($matches);?>  El resultado del ejemplo sería: Array ( [0] => Array ( [0] => foobarbaz [1] => 0 ) [1] => Array ( [0] => foo [1] => 0 ) [2] => Array ( [0] => bar [1] => 3 ) [3] => Array ( [0] => baz [1] => 6 ) )  offset Normalmente, la búsqueda comienza por el principio de la cadena objetivo. El parámetro opcional offset se puede usar para especificar el lugar alternativo desde el cual comenzar la búsqueda (en bytes). Nota: Usar offset no es equivalente a pasar substr($sujeto, $índice) a preg_match() en lugar de la cadena objetivo, ya que pattern puede contener declaraciones como ^,$ o (?<=x). Compare:

 <?php$sujeto = "abcdef";$patrón = '/^def/';preg_match($patrón,$sujeto, $coincidencias, PREG_OFFSET_CAPTURE, 3);print_r($coincidencias);?> 

Array
(
)


mientras que este ejemplo

 <?php$sujeto = "abcdef";$patrón = '/^def/';preg_match($patrón, substr($sujeto,3), $coincidencias, PREG_OFFSET_CAPTURE);print_r($coincidencias);?> 

producirá

Array
(
[0] => Array
(
[0] => def
[1] => 0
)

)


### Valores devueltos

preg_match() devuelve 1 si pattern coincide con el subject dado, 0 si no, o FALSE si ocurrió un error.

Esta función puede devolver el valor booleano FALSE, pero también puede devolver un valor no booleano que se evalúa como FALSE. Por favor lea la sección sobre Booleanos para más información. Use el operador === para comprobar el valor devuelto por esta función.

### Historial de cambios

Versión Descripción
5.3.6 Devuelve FALSE si offset es mayor que la longitud de subject.
5.2.2 Los sub-patrones nominados ahora aceptan la sintaxis (?<nombre>) y (?'nombre') así como (?P<nombre>). Las versiones anteriores sólo aceptaban (?P<nombre>).

### Ejemplos

Ejemplo #1 Busca la cadena de texto "php"

 <?php// La "i" después del delimitador de patrón indica una búsqueda// sin tener en cuenta mayúsculas/minúsculasif (preg_match("/php/i", "PHP es el lenguaje de secuencias de comandos web preferido.")) {    echo "Se encontró una coincidencia.";} else {    echo "No se encontró ninguna coincidencia.";}?> 

Ejemplo #2 Busca la palabra "web"

 <?php/* El \b en el patrón indica un límite de palabra, por lo que sólo la palabra * definida "web" se compara, y no una palabra parcial como "webbing" o "cobweb" */if (preg_match("/\bweb\b/i", "PHP es el lenguaje de secuencias de comandos web preferido.")) {    echo "Se encontró una coincidencia.";} else {    echo "No se encontró ninguna coincidencia.";}if (preg_match("/\bweb\b/i", "PHP es el lenguaje de secuencias de comandos website preferido.")) {    echo "Se encontró una coincidencia.";} else {    echo "No se encontró ninguna coincidencia.";}?> 

Ejemplo #3 Obtener el nombre de dominio de una URL

 <?php// obtiene el nombre del host de la URLpreg_match('@^(?:http://)?([^/]+)@i',    "http://www.php.net/index.html", $coincidencias);$host = $coincidencias[1];// obtiene los dos últimos segmentos del nombre del hostpreg_match('/[^.]+\.[^.]+$/', $host,$coincidencias);echo "El nombre de dominio es: {$coincidencias[0]}\n";?>  El resultado del ejemplo sería: El nombre de dominio es: php.net  Ejemplo #4 Usar sub-patrones nominados  <?php$cadena = 'foobar: 2008';preg_match_all('/(?P<nombre>\w+): (?P<dígito>\d+)/', $cadena,$coincidencias);/* Esto también funciona en PHP 5.2.2 (PCRE 7.0) y posteriores, sin embargo * la forma de arriba es la recomendada por compatibilidad con versiones anteriores */// preg_match_all('/(?<nombre>\w+): (?<dígito>\d+)/', $cadena,$coincidencias);print_r($coincidencias);?>  El resultado del ejemplo sería: Array ( [0] => foobar: 2008 [name] => foobar [1] => foobar [digit] => 2008 [2] => 2008 )  ### Notas Sugerencia No use preg_match() si solo quiere comprobar si una cadena está contenida en otra cadena. Use strpos() en su lugar ya que será más rápida. ### Ver también add a note ### User Contributed Notes 55 notes 737 force at md-t dot org 7 years ago  Simple regexRegex quick reference[abc] A single character: a, b or c[^abc] Any single character but a, b, or c[a-z] Any single character in the range a-z[a-zA-Z] Any single character in the range a-z or A-Z^ Start of line$     End of line\A     Start of string\z     End of string.     Any single character\s     Any whitespace character\S     Any non-whitespace character\d     Any digit\D     Any non-digit\w     Any word character (letter, number, underscore)\W     Any non-word character\b     Any word boundary character(...)     Capture everything enclosed(a|b)     a or ba?     Zero or one of aa*     Zero or more of aa+     One or more of aa{3}     Exactly 3 of aa{3,}     3 or more of aa{3,6}     Between 3 and 6 of aoptions: i case insensitive m make dot match newlines x ignore whitespace in regex o perform #{...} substitutions only once 
aer0s
6 years ago
 Simple function to return a sub-string following the preg convention. Kind of expensive, and some might say lazy but it has saved me time.# preg_substr($pattern,$subject,[$offset]) function# @author aer0s# return a specific sub-string in a string using # a regular expression # @param$pattern   regular expression pattern to match# @param   $subject string to search# @param [$offset]   zero based match occurrence to return#                             # [$offset] is 0 by default which returns the first occurrence,# if [$offset] is -1 it will return the last occurrence function preg_substr($pattern,$subject,$offset=0){ preg_match_all($pattern,$subject,$matches,PREG_PATTERN_ORDER);    return $offset==-1?array_pop($matches[0]):$matches[0][$offset];} example:              $pattern = "/model(\s|-)[a-z0-9]/i";$subject = "Is there something wrong with model 654, Model 732, and model 43xl or is Model aj45B the preferred choice?";             echo preg_substr($pattern,$subject);             echo preg_substr($pattern,$subject,1);             echo preg_substr($pattern,$subject,-1); Returns something like:             model 654             Model 732             Model aj45B 
75
MrBull
7 years ago
 Sometimes its useful to negate a string. The first method which comes to mind to do this is: [^(string)] but this of course won't work. There is a solution, but it is not very well known. This is the simple piece of code on how a negation of a string is done:(?:(?!string).)?: makes a subpattern (see http://www.php.net/manual/en/regexp.reference.subpatterns.php) and ?! is a negative look ahead. You put the negative look ahead in front of the dot because you want the regex engine to first check if there is an occurrence of the string you are negating. Only if it is not there, you want to match an arbitrary character.Hope this helps some ppl. 
50
cebelab at gmail dot com
8 years ago
 I noticed that in order to deal with UTF-8 texts, without having to recompile php with the PCRE UTF-8 flag enabled, you can just add the following sequence at the start of your pattern: (*UTF8)for instance : '#(*UTF8)[[:alnum:]]#' will return TRUE for 'é' where '#[[:alnum:]]#' will return FALSEfound this very very useful tip after hours of research over the web directly in pcre website right here : http://www.pcre.org/pcre.txtthere are many further informations about UTF-8 support in the libhop that will help!--cedric 
19
splattermania at freenet dot de
9 years ago
 As I wasted lots of time finding a REAL regex for URLs and resulted in building it on my own, I now have found one, that seems to work for all kinds of urls: <?php     $regex = "((https?|ftp)\:\/\/)?"; // SCHEME$regex .= "([a-z0-9+!*(),;?&=\$_.-]+(\:[a-z0-9+!*(),;?&=\$_.-]+)?@)?"; // User and Pass     $regex .= "([a-z0-9-.]*)\.([a-z]{2,3})"; // Host or IP$regex .= "(\:[0-9]{2,5})?"; // Port     $regex .= "(\/([a-z0-9+\$_-]\.?)+)*\/?"; // Path     $regex .= "(\?[a-z+&\$_.-][a-z0-9;:@&%=+\/\$_.-]*)?"; // GET Query$regex .= "(#[a-z_.-][a-z0-9+\$_.-]*)?"; // Anchor ?> Then, the correct way to check against the regex ist as follows: <?php if(preg_match("/^$regex$/",$url))        {                return true;        } ?> 
14
ruakuu at NOSPAM dot com
9 years ago
 Was working on a site that needed japanese and alphabetic letters and needed to validate input using preg_match, I tried using \p{script} but didn't work:<?php$pattern ='/^([-a-zA-Z0-9_\p{Katakana}\p{Hiragana}\p{Han}]*)$/u'; // Didn't work?>So I tried with ranges and it worked:<?php$pattern ='/^[-a-zA-Z0-9_\x{30A0}-\x{30FF}' .'\x{3040}-\x{309F}\x{4E00}-\x{9FBF}\s]*$/u';$match_string = '印刷最安 ニキビ跡除去 ゲームボーイ';if (preg_match($pattern, $match_string)) { echo "Found - pattern$pattern";} else {    echo "Not found - pattern $pattern";}?>U+4E00–U+9FBF KanjiU+3040–U+309F HiraganaU+30A0–U+30FF KatakanaHope its useful, it took me several hours to figure it out.  37 mohammad40g at gmail dot com 7 years ago  This sample is for checking persian character:<?php preg_match("/[\x{0600}-\x{06FF}\x]{1,32}/u", 'محمد');?>  31 arash dot hemmat at gmail dot com 7 years ago  For those who search for a unicode regular expression example using preg_match here it is:Check for Persian digitspreg_match( "/[^\x{06F0}-\x{06F9}\x]+/u" , '۱۲۳۴۵۶۷۸۹۰' );  22 Yousef Ismaeil Cliprz 5 years ago  Some times a Hacker use a php file or shell as a image to hack your website. so if you try to use move_uploaded_file() function as in example to allow for users to upload files, you must check if this file contains a bad codes or not so we use this function. preg matchin this function we useunlink() - http://php.net/unlinkafter you upload file check a file with below function. <?php/** * A simple function to check file from bad codes. * * @param (string)$file - file path. * @author Yousef Ismaeil - Cliprz[at]gmail[dot]com. */function is_clean_file ($file){ if (file_exists($file))    {        $contents = file_get_contents($file);    }    else    {        exit($file." Not exists."); } if (preg_match('/(base64_|eval|system|shell_|exec|php_)/i',$contents))    {        return true;    }    else if (preg_match("#&\#x([0-9a-f]+);#i", $contents)) { return true; } elseif (preg_match('#&\#([0-9]+);#i',$contents))    {        return true;    }    elseif (preg_match("#([a-z]*)=([\\'\"]*)script:#iU", $contents)) { return true; } elseif (preg_match("#([a-z]*)=([\\'\"]*)javascript:#iU",$contents))    {        return true;    }    elseif (preg_match("#([a-z]*)=([\'\"]*)vbscript:#iU", $contents)) { return true; } elseif (preg_match("#(<[^>]+)style=([\\'\"]*).*expression$$[^>]*>#iU", contents)) { return true; } elseif (preg_match("#(<[^>]+)style=([\\'\"]*).*behaviour\([^>]*>#iU", contents)) { return true; } elseif (preg_match("#</*(applet|link|style|script|iframe|frame|frameset|html|body|title|div|p|form)[^>]*>#i", contents)) { return true; } else { return false; }}?>Use<?php// If image contains a bad codesimage = "simpleimage.png";if (is_clean_file(image)){ echo "Bad codes this is not image"; unlink(image);}else{ echo "This is a real image.";}?>  17 daevid at daevid dot com 9 years ago  I just learned about named groups from a Python friend today and was curious if PHP supported them, guess what -- it does!!!http://www.regular-expressions.info/named.html<?php preg_match("/(?P<foo>abc)(.*)(?P<bar>xyz)/", 'abcdefghijklmnopqrstuvwxyz', matches); print_r(matches);?>will produce: Array( [0] => abcdefghijklmnopqrstuvwxyz [foo] => abc [1] => abc [2] => defghijklmnopqrstuvw [bar] => xyz [3] => xyz)Note that you actually get the named group as well as the numerical keyvalue too, so if you do use them, and you're counting array elements, beaware that your array might be bigger than you initially expect it to be.  ulli dot luftpumpe at murkymind dot de 6 years ago  Matching a backslash character can be confusing, because double escaping is needed in the pattern: first for PHP, second for the regex engine<?php//match newline control character:preg_match('/\n/','\n'); //pattern matches and is stored as control character 0x0A in the pattern stringpreg_match('/\\\n/','\n'); //very same match, but is stored escaped as 0x5C,0x6E in the pattern string//trying to match "\'" (2 characters) in a text file, '\\\'' as PHP string:subject = file_get_contents('myfile.txt');preg_match('/\\\'/',subject); //DOESN'T MATCH!!! stored as 0x5C,0x27 (escaped apostrophe), this only matches apostrophepreg_match('/\\\\\'/',subject); //matches, stored as 0x5C,0x5C,0x27 (escaped backslash and unescaped apostrophe)preg_match('/\\\\\\\/',subject); //also matches, stored as 0x5C,0x5C,0x5C,0x27 (escaped backslash and escaped apostrophe)//matching "\n" (2 characters):preg_match('/\\\\n/','\\n');preg_match('/\\\n/','\\n'); //same match - 3 backslashes are interpreted as 2 in PHP, if the following character is not escapeable?>  andre at koethur dot de 5 years ago  Be aware of bug https://bugs.php.net/bug.php?id=50887 when using sub patterns: Un-matched optional sub patterns at the end won't show up in matches.Here is a workaround: Assign a name to all subpatterns you are interested in, and merge match afterwards with an constant array containing some reasonable default values:<?phpif (preg_match('/^(?P<lang>[^;*][^;]*){1}(?:;q=(?P<qval>[0-9.]+))?/u', 'de', match)){ match = array_merge(array('lang' => '', 'qval' => ''), match); print_r(match);}?>This outputs:Array( [lang] => de [qval] => [0] => de [1] => de)Instead of:Array( [0] => de [lang] => de [1] => de)  12 yofilter-php at yahoo dot co dot uk 5 years ago  There does not seem to be any mention of the PHP version of switches that can be used with regular expressions. preg_match_all('/regular expr/sim',text). The s i m being the location for and available switches (I know about) The i is to ignore letter cases (this is commonly known - I think) The s tells the code NOT TO stop searching when it encounters \n (line break) - this is important with multi-line entries for example text from an editor that needs search. The m tells the code it is a multi-line entry, but importantly allows the use of ^ and to work when showing start and end. I am hoping this will save someone from the 4 hours of torture that I endured, trying to workout this issue.  26 jonathan dot lydall at gmail dot removethispart dot com 10 years ago  Because making a truly correct email validation function is harder than one may think, consider using this one which comes with PHP through the filter_var function (http://www.php.net/manual/en/function.filter-var.php):<?phpemail = "someone@domain .local";if(!filter_var(email, FILTER_VALIDATE_EMAIL)) { echo "E-mail is not valid";} else { echo "E-mail is valid";}?>  sainnr at gmail dot com 7 years ago  This sample regexp may be useful if you are working with DB field types. (?P<type>\w+)(|\((?P<length>(\d+|(.*)))$$)For example, if you are have a such type as "varchar(255)" or "text", the next fragment<?php$type = 'varchar(255)';  // type of field   preg_match('/(?P<type>\w+)($|$$(?P<length>(\d+|(.*)))$$)/',$type, $field); print_r($field);?>will output something like this:Array ( [0] => varchar(255) [type] => varchar [1] => varchar [2] => (255) [length] => 255 [3] => 255 [4] => 255 ) 
akniep at rayo dot info
9 years ago
 Bugs of preg_match (PHP-version 5.2.5)In most cases, the following example will show one of two PHP-bugs discovered with preg_match depending on your PHP-version and configuration.<?php$text = "test=";// creates a rather long textfor ($i = 0; $i++ < 100000;)$text .= "%AB";// a typical URL_query validity-checker (the pattern's function does not matter for this example)$pattern = '/^(?:[;\/?:@&=+$,]|(?:[^\W_]|[-_.!~*$$) ])|(?:%[\da-fA-F]{2}))*/'; var_dump( preg_match( pattern, text ) );?>Possible bug (1):=============On one of our Linux-Servers the above example crashes PHP-execution with a C(?) Segmentation Fault(!). This seems to be a known bug (see http://bugs.php.net/bug.php?id=40909), but I don't know if it has been fixed, yet.If you are looking for a work-around, the following code-snippet is what I found helpful. It wraps the possibly crashing preg_match call by decreasing the PCRE recursion limit in order to result in a Reg-Exp error instead of a PHP-crash.<?php[...]// decrease the PCRE recursion limit for the (possibly dangerous) preg_match callformer_recursion_limit = ini_set( "pcre.recursion_limit", 10000 );// the wrapped preg_match callresult = preg_match( pattern, text );// reset the PCRE recursion limit to its original valueini_set( "pcre.recursion_limit", former_recursion_limit );// if the reg-exp fails due to the decreased recursion limit we may not make any statement, but PHP-execution continuesif ( PREG_RECURSION_LIMIT_ERROR === preg_last_error() ){ // react on the failed regular expression here result = [...]; // do logging or email-sending here [...]} //if?>Possible bug (2):=============On one of our Windows-Servers the above example does not crash PHP, but (directly) hits the recursion-limit. Here, the problem is that preg_match does not return boolean(false) as expected by the description / manual of above.In short, preg_match seems to return an int(0) instead of the expected boolean(false) if the regular expression could not be executed due to the PCRE recursion-limit. So, if preg_match results in int(0) you seem to have to check preg_last_error() if maybe an error occurred.  14 corey [works at] effim [delete] .com 9 years ago  I see a lot of people trying to put together phone regex's and struggling (hey, no worries...they're complicated). Here's one that we use that's pretty nifty. It's not perfect, but it should work for most non-idealists. *** Note: Only matches U.S. phone numbers. *** <?php // all on one line... regex = '/^(?:1(?:[. -])?)?(?:\((?=\d{3}$$))?([2-9]\d{2})(?:(?<=$$\d{3})$$)? ?(?:(?<=\d{3})[.-])?([2-9]\d{2})[. -]?(\d{4})(?: (?i:ext)\.? ?(\d{1,5}))?$/'; // or broken up$regex = '/^(?:1(?:[. -])?)?(?:$$(?=\d{3}$$))?([2-9]\d{2})'         .'(?:(?<=$$\d{3})$$)? ?(?:(?<=\d{3})[.-])?([2-9]\d{2})'         .'[. -]?(\d{4})(?: (?i:ext)\.? ?(\d{1,5}))?$/'; ?> If you're wondering why all the non-capturing subpatterns (which look like this "(?:", it's so that we can do this: <?php$formatted = preg_replace($regex, '($1) $2-$3 ext. $4',$phoneNumber); // or, provided you use the $matches argument in preg_match$formatted = "($matches[1])$matches[2]-$matches[3]"; if ($matches[4]) $formatted .= "$matches[4]"; ?> *** Results: *** 520-555-5542 :: MATCH 520.555.5542 :: MATCH 5205555542 :: MATCH 520 555 5542 :: MATCH 520) 555-5542 :: FAIL (520 555-5542 :: FAIL (520)555-5542 :: MATCH (520) 555-5542 :: MATCH (520) 555 5542 :: MATCH 520-555.5542 :: MATCH 520 555-0555 :: MATCH (520)5555542 :: MATCH 520.555-4523 :: MATCH 19991114444 :: FAIL 19995554444 :: MATCH 514 555 1231 :: MATCH 1 555 555 5555 :: MATCH 1.555.555.5555 :: MATCH 1-555-555-5555 :: MATCH 520-555-5542 ext.123 :: MATCH 520.555.5542 EXT 123 :: MATCH 5205555542 Ext. 7712 :: MATCH 520 555 5542 ext 5 :: MATCH 520) 555-5542 :: FAIL (520 555-5542 :: FAIL (520)555-5542 ext .4 :: FAIL (512) 555-1234 ext. 123 :: MATCH 1(555)555-5555 :: MATCH 
13
ian_channing at hotmail dot com
9 years ago
 This is a function that uses regular expressions to match against the various VAT formats required across the EU. <?php /** * @param integer $country Country name * @param integer$vat_number VAT number to test e.g. GB123 4567 89 * @return integer -1 if country not included OR 1 if the VAT Num matches for the country OR 0 if no match */ function checkVatNumber( $country,$vat_number ) {     switch($country) { case 'Austria':$regex = '/^(AT){0,1}U[0-9]{8}$/i'; break; case 'Belgium':$regex = '/^(BE){0,1}[0]{0,1}[0-9]{9}$/i'; break; case 'Bulgaria':$regex = '/^(BG){0,1}[0-9]{9,10}$/i'; break; case 'Cyprus':$regex = '/^(CY){0,1}[0-9]{8}[A-Z]$/i'; break; case 'Czech Republic':$regex = '/^(CZ){0,1}[0-9]{8,10}$/i'; break; case 'Denmark':$regex = '/^(DK){0,1}([0-9]{2}[\ ]{0,1}){3}[0-9]{2}$/i'; break; case 'Estonia': case 'Germany': case 'Greece': case 'Portugal':$regex = '/^(EE|EL|DE|PT){0,1}[0-9]{9}$/i'; break; case 'France':$regex = '/^(FR){0,1}[0-9A-Z]{2}[\ ]{0,1}[0-9]{9}$/i'; break; case 'Finland': case 'Hungary': case 'Luxembourg': case 'Malta': case 'Slovenia':$regex = '/^(FI|HU|LU|MT|SI){0,1}[0-9]{8}$/i'; break; case 'Ireland':$regex = '/^(IE){0,1}[0-9][0-9A-Z\+\*][0-9]{5}[A-Z]$/i'; break; case 'Italy': case 'Latvia':$regex = '/^(IT|LV){0,1}[0-9]{11}$/i'; break; case 'Lithuania':$regex = '/^(LT){0,1}([0-9]{9}|[0-9]{12})$/i'; break; case 'Netherlands':$regex = '/^(NL){0,1}[0-9]{9}B[0-9]{2}$/i'; break; case 'Poland': case 'Slovakia':$regex = '/^(PL|SK){0,1}[0-9]{10}$/i'; break; case 'Romania':$regex = '/^(RO){0,1}[0-9]{2,10}$/i'; break; case 'Sweden':$regex = '/^(SE){0,1}[0-9]{12}$/i'; break; case 'Spain':$regex = '/^(ES){0,1}([0-9A-Z][0-9]{7}[A-Z])|([A-Z][0-9]{7}[0-9A-Z])$/i'; break; case 'United Kingdom':$regex = '/^(GB){0,1}([1-9][0-9]{2}[\ ]{0,1}[0-9]{4}[\ ]{0,1}[0-9]{2})|([1-9][0-9]{2}[\ ]{0,1}[0-9]{4}[\ ]{0,1}[0-9]{2}[\ ]{0,1}[0-9]{3})|((GD|HA)[0-9]{3})$/i'; break; default: return -1; break; } return preg_match($regex, $vat_number); } ?>  solixmexico at outlook dot com 2 years ago  To validate directorys on Windows i used this:if( preg_match("#^([a-z]{1}\:{1})?[\\\/]?([\-\w]+[\\\/]?)*$#i",$_GET['path'],$matches) !== 1 ){    echo("Invalid value");}else{    echo("Valid value");}The parts are:#^ and $i Make the string matches at all the pattern, from start to end for ensure a complete match.([a-z]{1}\:{1})? The string may starts with one letter and a colon, but only 1 character for eachone, this is for the drive letter (C:)[\\\/]? The string may contain, but not require 1 slash or backslash after the drive letter, (\/)([\-\w]+[\\\/]?)* The string must have 1 or more of any character like hyphen, letter, number, underscore, and may contain a slash or back slash at the end, to have a directory like ("/" or "folderName" or "folderName/"), this may be repeated one or more times.  11 Kae Cyphet 8 years ago  for those coming over from ereg, preg_match can be quite intimidating. to get started here is a migration tip. <?php if(ereg('[^0-9A-Za-z]',$test_string)) // will be true if characters arnt 0-9, A-Z or a-z. if(preg_match('/[^0-9A-Za-z]/',$test_string)) // this is the preg_match version. the /'s are now required. ?>  10 luc _ santeramo at t yahoo dot com 9 years ago  If you want to validate an email in one line, use filter_var() function !http://fr.php.net/manual/en/function.filter-var.phpeasy use, as described in the document example :var_dump(filter_var('bob@example.com', FILTER_VALIDATE_EMAIL));  SoN9ne at gmail dot com 8 years ago  I have been working on a email system that will automatically generate a text email from a given HTML email by using strip_tags(). The only issue I ran into, for my needs, were that the anchors would not keep their links. I search for a little while and could not find anything to strip the links from the tags so I generated my own little snippet. I am posting it here in hopes that others may find it useful and for later reference.A note to keep in mind:I was primarily concerned with valid HTML so if attributes do no use ' or " to contain the values then this will need to be tweaked.If you can edit this to work better, please let me know.<?php/** * Replaces anchor tags with text * - Will search string and replace all anchor tags with text (case insensitive) * * How it works: * - Searches string for an anchor tag, checks to make sure it matches the criteria * Anchor search criteria: * - 1 - <a (must have the start of the anchor tag ) * - 2 - Can have any number of spaces or other attributes before and after the href attribute * - 3 - Must close the anchor tag * * - Once the check has passed it will then replace the anchor tag with the string replacement * - The string replacement can be customized * * Know issue: * - This will not work for anchors that do not use a ' or " to contain the attributes. * (i.e.- <a href=http: //php.net>PHP.net</a> will not be replaced) */function replaceAnchorsWithText($data) {    /**     * Had to modify $regex so it could post to the site... so I broke it into 6 parts. */$regex  = '/(<a\s*'; // Start of anchor tag    $regex .= '(.*?)\s*'; // Any attributes or spaces that may or may not exist$regex .= 'href=[\'"]+?\s*(?P<link>\S+)\s*[\'"]+?'; // Grab the link    $regex .= '\s*(.*?)\s*>\s*'; // Any attributes or spaces that may or may not exist before closing tag$regex .= '(?P<name>\S+)'; // Grab the name    $regex .= '\s*<\/a>)/i'; // Any number of spaces between the closing anchor tag (case insensitive) if (is_array($data)) {        // This is what will replace the link (modify to you liking)        $data = "{$data['name']}({$data['link']})"; } return preg_replace_callback($regex, 'replaceAnchorsWithText', $data);}$input  = 'Test 1: <a href="http: //php.net1">PHP.NET1</a>.<br />';$input .= 'Test 2: <A name="test" HREF=\'HTTP: //PHP.NET2\' target="_blank">PHP.NET2</A>.<BR />';$input .= 'Test 3: <a hRef=http: //php.net3>php.net3</a><br />';$input .= 'This last line had nothing to do with any of this';echo replaceAnchorsWithText($input).'<hr/>';?>Will output:Test 1: PHP.NET1(http: //php.net1).Test 2: PHP.NET2(HTTP: //PHP.NET2).Test 3: php.net3 (is still an anchor)This last line had nothing to do with any of thisPosting to this site is painful...Had to break up the regex and had to break the test links since it was being flagged as spam... 
Jonny 5
6 years ago
 Workaround for getting the offset in UTF-8 (in some cases mb_strpos might be an option as well) <?php if(preg_match($pattern,$haystack,$out,PREG_OFFSET_CAPTURE)) {$offset = strlen(utf8_decode(substr($haystack,0,$out[0][1]))); } ?> 
ian_channing at hotmail dot com
7 years ago
 When trying to check a file path that could be windows or unix it took me quite a few tries to get the escape characters right.The Unix directory separator must be escaped once and the windows directory separator must be escaped twice.This will match path/to/file and path\to\file.exepreg_match('/^[a-z0-9_.\/\\\]*$/i',$file_string); 
danielrydell at gmail dot com
1 year ago
 When trying to match accented characters, such as those found in Spanish, there seems to be a different internal interpretation when using character classes. So the best way is to add the u option (for unicode) after the delimiters.<?php//echoes 1 (adding u would not alter the result)echo preg_match('/^áéíóúñ$/', 'áéíóúñ');//echoes 0 (unless with [ó]+ or [ó]* or adding u)echo preg_match('/^áéí[ó]úñ$/', 'áéíóúñ');//so to match 'espana' or 'españa', add u or this won't match//echoes 1echo preg_match('/^espa[nñ]a$/u', 'españa');?>  Anonymous 6 years ago  Here is a function that decreases the numbers inside a string (useful to convert DOM object into simplexml object)e.g.: decremente_chaine("somenode->anode[2]->achildnode[3]") will return "somenode->anode[1]->achildnode[2]"the numbering of the nodes in simplexml starts from zero, but from 1 in DOM xpath objects<?phpfunction decremente_chaine($chaine)    {        //récupérer toutes les occurrences de nombres et leurs indices        preg_match_all("/[0-9]+/",$chaine,$out,PREG_OFFSET_CAPTURE);            //parcourir les occurrences             for($i=0;$i<sizeof($out[0]);$i++)            {                $longueurnombre = strlen((string)$out[0][$i][0]);$taillechaine = strlen($chaine); // découper la chaine en 3 morceaux$debut = substr($chaine,0,$out[0][$i][1]);$milieu = ($out[0][$i][0])-1;                $fin = substr($chaine,$out[0][$i][1]+$longueurnombre,$taillechaine);                 // si c'est 10,100,1000 etc. on décale tout de 1 car le résultat comporte un chiffre de moins                 if(preg_match('#[1][0]+$#',$out[0][$i][0])) { for($j = $i+1;$j<sizeof($out[0]);$j++)                    {                        $out[0][$j][1] = $out[0][$j][1] -1;                    }                 }                $chaine =$debut.$milieu.$fin;            }        return $chaine; }?>  ayman2243 at gmail dot com 7 years ago  highlight Search Words <?php function highlight($word, $subject) {$split_subject = explode(" ", $subject);$split_word = explode(" ", $word); foreach ($split_subject as $k =>$v){            foreach ($split_word as$k2 => $v2){ if($v2 == $v){$split_subject[$k] = "<span class='highlight'>".$v."</span>";                               }            }       }             return implode(' ', $split_subject); } ?>  teracci2002 8 years ago  When you use preg_match() for security purpose or huge data processing,mayby you should make consideration for backtrack_limit and recursion_limit.http://www.php.net/manual/en/pcre.configuration.phpThese limits may bring wrong matching result.You can verify whether you hit these limits by checking preg_last_error().http://www.php.net/manual/en/function.preg-last-error.php  matt 9 years ago  To support large Unicode ranges (ie: [\x{E000}-\x{FFFD}] or \x{10FFFFF}) you must use the modifier '/u' at the end of your expression.  plasma 8 years ago  To extract scheme, host, path, ect. simply use <?php$url  = 'http://name:pass@';   $url .= 'example.com:10000';$url .= '/path/to/file.php?a=1&amp;b=2#anchor';   $url_data = parse_url ($url );   print_r ( $url_data ); ?> ___ prints out something like: Array ( [scheme] => http [host] => wild.subdomain.orgy.domain.co.uk [port] => 10000 [user] => name [pass] => pass [path] => /path/to/file.php [query] => a=1&b=2 [fragment] => anchor ) In my tests parse_url is up to 15x faster than preg_match(_all)!  skds1433 at hotmail dot com 9 years ago  here is a small tool for someone learning to use regular expressions. it's very basic, and allows you to try different patterns and combinations. I made it to help me, because I like to try different things, to get a good understanding of how things work.<?php$search = isset($_POST['search'])?$_POST['search']:"//";$match = isset($_POST['match'])?$_POST['match']:"<>";echo '<form method="post">';echo 's: <input style="width:400px;" name="search" type="text" value="'.$search.'" /><br />';echo 'm:<input style="width:400px;" name="match" type="text" value="'.$match.'" /><input type="submit" value="go" /></form><br />';if (preg_match($search, $match)){echo "matches";}else{echo "no match";}?>  itworkarounds at gmail dot com 7 years ago  You can use the following code to detect non-latin (Cyrilic, Arabic, Greek...) characters: <?php preg_match("/^[a-zA-Z\p{Cyrillic}0-9\s\-]+$/u", "ABC abc 1234 АБВ абв"); ?> 
daniel dot chcouri at gmail dot com
9 years ago
 Html tags delete using regular expression <?php function removeHtmlTagsWithExceptions($html,$exceptions = null){     if(is_array($exceptions) && !empty($exceptions))     {         foreach($exceptions as$exception)         {             $openTagPattern = '/<(' .$exception . ')(\s.*?)?>/msi';             $closeTagPattern = '/<\/(' .$exception . ')>/msi';             $html = preg_replace( array($openTagPattern, $closeTagPattern), array('||l|\1\2|r||', '||l|/\1|r||'),$html             );         }     }     $html = preg_replace('/<.*?>/msi', '',$html);     if(is_array($exceptions)) {$html = str_replace('||l|', '<', $html);$html = str_replace('|r||', '>', $html); } return$html; } // example: print removeHtmlTagsWithExceptions(<<<EOF <h1>Whatsup?!</h1> Enjoy <span style="text-color:blue;">that</span> script<br /> <br /> EOF , array('br')); ?> 
phil dot taylor at gmail dot com
10 years ago
 If you need to check for .com.br and .com.au and .uk and all the other crazy domain endings i found the following expression works well if you want to validate an email address. Its quite generous in what it will allow <?php         $email_address = "phil.taylor@a_domain.tv"; if (preg_match("/^[^@]*@[^@]*\.[^@]*$/", $email_address)) { return "E-mail address"; } ?>  Nimja 6 years ago  When using a 'bad words reject string' filter, preg_match is MUCH faster than strpos / stripos. Because in the other cases, you would need to do a foreach for each word. With efficient programming, the foreach is ONLY faster when the first word in the ban-list is found.(for 12 words, 100,000 iterations, no word found)stripos - Taken 1.4876 seconds.strpos - Taken 1.4207 seconds.preg_match - Taken 0.189 seconds.Interesting fact:With long words ('averylongwordtospitepreg'), the difference is only much less. Only about a 2/3rd of the time instead of 1/6th<?php$words = array('word1', 'word2', 'word3', 'word4', 'word5', 'word6', 'word7', 'word8', 'word9', 'word10', 'word11', 'word12' );$teststring = 'ThIs Is A tEsTsTrInG fOr TeStInG.';$count = 100000;$find = 0;$start = microtime(TRUE);for ($i = 0;$i < $count;$i++) {    foreach ($words as$word) {        if (stripos($teststring,$word) !== FALSE) {            $find++; break; } }}echo 'stripos - Taken ' . round(microtime(TRUE) -$start, 4) . ' seconds.' . PHP_EOL;$start = microtime(TRUE);for ($i = 0; $i <$count; $i++) { foreach ($words as $word) { if (strpos($teststring, $word) !== FALSE) {$find++;            break;        }    }}echo 'strpos - Taken ' . round(microtime(TRUE) - $start, 4) . ' seconds.' . PHP_EOL;$start = microtime(TRUE);$pattern = '/';$div = '';foreach ($words as$word) {    $pattern .=$div . preg_quote($word);$div = '|';}$pattern .= '/i';//Pattern could easily be done somewhere else if words are static.for ($i = 0; $i <$count; $i++) { if (preg_match($pattern, $teststring)) {$find++;    }}$end = microtime(TRUE);echo 'preg_match - Taken ' . round($end - $start, 4) . ' seconds.' . PHP_EOL;?>  wjaspers4 [at] gmail [dot] com 9 years ago  I recently encountered a problem trying to capture multiple instances of named subpatterns from filenames.Therefore, I came up with this function.The function allows you to pass through flags (in this version it applies to all expressions tested), and generates an array of search results.Enjoy!<?php/** * Allows multiple expressions to be tested on one string. * This will return a boolean, however you may want to alter this. * * @author William Jaspers, IV <wjaspers4@gmail.com> * @created 2009-02-27 17:00:00 +6:00:00 GMT * @access public * * @param array$patterns An array of expressions to be tested. * @param String $subject The data to test. * @param array$findings Optional argument to store our results. * @param mixed $flags Pass-thru argument to allow normal flags to apply to all tested expressions. * @param array$errors A storage bin for errors * * @returns bool Whether or not errors occurred. */function preg_match_multiple(   array $patterns=array(),$subject=null,  &$findings=array(),$flags=false,  &$errors=array()) { foreach($patterns as $name =>$pattern )  {    if( 1 <= preg_match_all( $pattern,$subject, $found,$flags ) )    {      $findings[$name] = $found; } else { if( PREG_NO_ERROR !== ($code = preg_last_error() ))      {        $errors[$name] = $code; } else$findings[$name] = array(); } } return (0===sizeof($errors));}?> 
marcosc at tekar dot net
9 years ago
 When using accented characters and "ñ" (áéíóúñ), preg_match does not work. It is a charset problem, use utf8_decode/decode to fix. 
workhorse at op dot pl
7 years ago
 Preg_match returns empty result trying to validate $subject with carriege returns (/n/r).To solve it one need to use /s modifier in$pattern string.<?php$pattern='/.*/s';$valid=preg_match($pattern,$subject, $match);?>  Frank 7 years ago  If someone is from a country that accepts decimal numbers in format 9.00 and 9,00 (point or comma), number validation would be like that:<?php$number_check = "9,99";if (preg_match( '/^[\-+]?[0-9]*\.*\,?[0-9]+$/',$number_check)) {    return TRUE; }?>However, if the number will be written in the database, most probably this comma needs to be replaced with a dot. This can be done with use of str_replace, i.e :<?php$number_database = str_replace("," , "." ,$number_check);?> 
kevin
6 years ago
 here is a little function to get an associative array instead of the numeric one.<?phpfunction preg_match_assoc($pattern,$subject, $assoc,$flags = 0, $offset = 0) {$matches = array();    eval('preg_match($pattern,$subject, $matches,$flags, $offset);');$n = 0;    foreach($matches as$result) {        $array[$assoc[$n]] =$result;        $n++; } return$array;}?>example of use<?php$assocs = array( 'all', 'a-1', 'i-1', 'a-2', 'ia-1', 'ia-2');$test = preg_match_assoc('#([a-z]+)([0-9]+)([a-z]+)\-([a-z|0-9]+)\-([a-z|0-9]+)#', 'az45rt-df36qz-fg89ih', $assocs);//$test will contain ://// array//   'all' => string 'az45rt-df36qz-fg89ih' (length=20)//   'a-1' => string 'az' (length=2)//   'i-1' => string '45' (length=2)//   'a-2' => string 'rt' (length=2)//   'ia-1' => string 'df36qz' (length=6)//// Instead of ://// array//   0 => string 'az45rt-df36qz-fg89ih' (length=20)//   1 => string 'az' (length=2)//   2 => string '45' (length=2)//   2 => string 'rt' (length=2)//   4 => string 'df36qz' (length=6)//   5 => string 'fg89ih' (length=6)?> 
cmallabon at homesfactory dot com
7 years ago
 Just an interesting note. Was just updating code to replace ereg() with strpos() and preg_match and the thought occured that preg_match() could be optimized to quit early when only searching if a string begins with something, for example<?phpif(preg_match("/^http/", $url)){ //do something}?> vs <?php if(strpos($url, "http") === 0){//do something}?>As I guessed, strpos() is always faster (about 2x) for short strings like a URL but for very long strings of several paragraphs (e.g. a block of XML) when the string doesn't start with the needle preg_match as twice as fast as strpos() as it doesn't scan the entire string.So, if you are searching long strings and expect it to normally be true (e.g. validating XML), strpos() is a much faster BUT if you expect if to often fail, preg_match is the better choice. 
Anonymous
9 years ago
 If your regular expression does not match with long input text when you think it should, you might have hit the PCRE backtrack default limit of 100000. See http://php.net/pcre.backtrack-limit. 
chat dot noir at arcor dot de
1 year ago
 Note that if a parenthesed group is not matched, its key may or may not be present in $matches. For instance,<?php preg_match('/(foo)?(bar)?(baz)?/', 'bar',$matches);print_r($matches); // outputs// Array// (// [0] => bar// [1] => // [2] => bar// )?>Note that there is no element with key '3' in$matches, but an element with key '1' (the empty string). This inconsistent behavior also applies to named groups. 
geompse at gmail dot com
1 year ago
 The function will return false and raise a warning if the input $subject is too long :[PhpWarning] preg_match(): Subject is too longI believe the limit is 1 or 2 GB because I was using a 2.2GB string.While a parameter might exist to alter this limit, in my case it was possible and wiser to use <500MB strings instead.  mips at foshin dot com 1 year ago  Beware that while a non-matching optional parenthesized subpattern will be stored in$matches as an empty string ("") if there's at least one match following it, one or more at the end of the array will be omitted entirely!Poor example:<?php// Slightly modified, this checks for a valid, real number. Here, it stores the dash, whole part, and period with decimals in $matches.// Testing ".1":preg_match("/^(-)?(\\d+)?(\\.\\d+)?\$/", ".1", $matches);var_dump($matches);/*array(4) {  [0]=>  string(2) ".1"  [1]=>  string(0) ""  [2]=>  string(0) ""  [3]=>  string(2) ".1"*/// Testing "-":preg_match("/^(-)?(\\d+)?(\\.\\d+)?\$/", "-",$matches);var_dump($matches);/*array(2) { [0]=> string(1) "-" [1]=> string(1) "-"*/?>Notice that$matches[2] here is either "" or not set at all for the exact same result (not found). 
Web Architect
1 year ago
 You are sure your pattern is correct but preg_match always gives you false and preg_last_error()  gives you PREG_NO_ERROR? Are you tired of this and don't know what else you can check? So check flags of your pattern, my friend! There MUST be no g option. preg_match don't like that and that is why it gives you false. 
dkr at dotnull dot de
4 years ago
 I noted that PCRE_ANCHORED (the pattern modifier A) does work fine if using an offset. If you use the escape sequence \A or even the dash "^" in the regex, it does not work (even if in multiline mode)... <?php$text = 'foo bar';print (int) preg_match('/^bar/',$text,$a,null,4); // prints 0print (int) preg_match('/\Abar/',$text,$a,null,4); // prints 0print (int) preg_match('/bar/A',$text,$a,null,4); // prints 1?>Hope this helps someone out there! :-)Version: PHP 5.5.12  Gilles A 4 years ago  Using named subpattern :Since PCRE 7.0 ( PHP >= 5.2.2) , named groups can be defined using (?<name>) or (?'name') instead of (?P<name>)<?php$str = 'foobar: 2008';preg_match('/(?P<name>\w+): (?P<digit>\d+)/', $str,$matches);print_r($matches);//Orpreg_match('/(?\'name\'\w+): (?\'digit\'\d+)/',$str, $matches);print_r($matches);//Orpreg_match('/(?<name>\w+): (?<digit>\d+)/', $str,$matches);print_r($matches);?>//Result Array( [0] =>foobar: 2008 [name] => foobar [1] => foobar [digit] => 2008 [2] => 2008)Array( [0] => foobar: 2008 [name] => foobar [1] => foobar [digit] => 2008 [2] => 2008)Array( [0] => foobar: 2008 [name] => foobar [1] => foobar [digit] => 2008 [2] => 2008)  asdfasdasad34535 at iflow dot at 5 years ago  Attention! PREG_OFFSET_CAPTURE not UTF-8 aware when using u modifierand it's not a but, it's a feature:https://bugs.php.net/bug.php?id=37391Possible workaround: Use mb_strpos to get the correct offset, instead of the flag. UTF-8 support would be nice.  jphansen at uga dot edu 6 years ago  Here's a regex to validate against the schema for common MySQL identifiers: <?php$string = "$table_name"; if (preg_match("/[^\\d\\sa-zA-Z$_]/", $string)) echo "Failed validation"; ?>  sun at drupal dot org 7 years ago  Basic test for invalid UTF-8 that can hi-jack IE:<?php$valid = (preg_match('/^./us', $text) == 1);?>See http://api.drupal.org/api/drupal/includes--bootstrap.inc/function/drupal_validate_utf8/7 for details.---Test for valid UTF-8 and XML/XHTML character range compatibility:<?php$invalid = preg_match('@[^\x9\xA\xD\x20-\x{D7FF}\x{E000}-\x{FFFD}\x{10000}-\x{10FFFF}]@u', $text)?>Ref: http://www.w3.org/TR/2000/REC-xml-20001006#charsets  Dr@ke 8 years ago  Hello,There is a bug with somes new PCRE versions (like:7.9 2009-04-1),In patterns:\w+ !== [a-zA-Z0-9]+But it's ok, if i replace \w+ by [a-z0-9]+ or [a-zA-Z0-9]+  Anonymous 8 years ago  The regular expression for breaking-down a URI reference into its components: ^(([^:/?#]+):)?(//([^/?#]*))?([^?#]*)(\?([^#]*))?(#(.*))? 12 3 4 5 6 7 8 9Source: ietf.org/rfc/rfc2396.txt  Stefan 9 years ago  I spent a while replacing all my ereg() calls to preg_match(), since ereg() is now deprecated and will not be supported as of v 6.0. Just a warning regarding the conversion, the two functions behave very similarly, but not exactly alike. Obviously, you will need to delimit your pattern with '/' or '|' characters. The difference that stumped me was that preg_replace overwrites the$matches array regardless if a match was found. If no match was found, $matches is simply empty. ereg(), however, would leave$matches alone if a match was not found. In my code, I had repeated calls to ereg, and was populating $matches with each match. I was only interested in the last match. However, with preg_match, if the very last call to the function did not result in a match, the$matches array would be overwritten with a blank value. Here is an example code snippet to illustrate: <?php $test = array('yes','no','yes','no','yes','no'); foreach ($test as $key=>$value) {   ereg("yes",$value,$matches1);   preg_match("|yes|",$value,$matches2); }   print "ereg result: $matches1[0]<br>"; print "preg_match result:$matches2[0]<br>"; ?> The output is: ereg result: yes preg_match result: ($matches2[0] in this case is empty) I believe the preg_match behavior is cleaner. I just thought I would report this to hopefully save others some time.  Alex Zinchenko 9 years ago  If you need to check whether string is a serialized representation of variable(sic!) you can use this :<?php$string = "a:0:{}";if(preg_match("/(a|O|s|b)\x3a[0-9]*?((\x3a((\x7b?(.+)\x7d)|(\x22(.+)\x22\x3b)))|(\x3b))/", \$string)) {echo "Serialized.";}else {echo "Not serialized.";}?>But don't forget, string in serialized representation could be VERY big, so match work can be slow, even with fast preg_* functions.